rbtrading.site / free tools / position size calculator

Position Size Calculator
risk the right amount, every trade.

Position size = (account balance × risk %) ÷ (stop distance × value per unit of distance). Example: a $10,000 account risking 1% with a 25-pip stop on EURUSD (pip value $10) = $100 ÷ (25 × $10) = 0.40 lots. Covers 27 forex pairs, 5 metals, 8 cash indices, 13 CME futures and 6 perps (BTC, ETH, SOL, XRP, gold and the S&P 500). Enter your real entry and stop and it returns the size plus 1.5R/2R/3R/5R targets. On a perp it also shows the margin, both fees and whether liquidation comes before your stop.

Most pros risk 0.5–2%. 1% is the standard.
Must be below entry for a long.
0.40
Lots
25.0
Pips at risk
$100
Amount at risk
Targets at multiples of your risk
–
1.5R
–
2R
–
3R
–
5R

How the calculation works

The formula is lots = (balance × risk%) ÷ (stop pips × pip value). You decide the two inputs that are actually yours to control, how much of the account one trade may cost you, and where the trade is wrong (the stop). The lot size is then a calculation, not a feeling. Doubling your stop distance halves your size; it never has to mean doubling your risk.

JPY pairs are the classic trap, twice over. First, they quote to 2–3 decimals, so one pip is 0.01 and not 0.0001, miss that and a 25-pip stop counts as 2,500 pips and your size comes out 100× too small. Second, the pip value tracks the USD/JPY rate: roughly $6.67 per pip per lot at 150.00, where an older 110.00 rate would have implied $9.10. This calculator uses the same values as the RB Trading journal so the two never disagree. Futures use tick size and tick value; indices convert their home-currency point value to USD. All are approximations, your broker's contract specification is the authority.

Sizing a perp: units, fees and liquidation

A perpetual future is sized in units of the asset, not lots: 0.047 BTC, 2.5 ETH or 4.587 units of the S&P 500. One unit of a USDT perp moves $1 for every 1.00 the price moves, so the stop distance in price is the loss per unit. The fee to open and the fee to close are paid on the position value, so they come off the risk too: units = cash at risk ÷ (stop distance + (entry + stop) × fee %). Sizes round down to the exchange's step, so a trade never risks more than you planned.

Example: a $10,000 account risking 1% on a BTC perp long at 100,000 with the stop at 98,000 and a 0.05% fee each side. Per unit the stop costs 2,000 and the two fees 99, so the size is $100 ÷ 2,099 = 0.047 BTC, worth $4,700. At 10x it ties up $470 of margin and the liquidation estimate is about 90,500, well past the stop. At 50x the estimate moves to about 98,500, above the 98,000 stop, so the exchange would close the trade before your stop could. The calculator flags that and tells you the most leverage the stop allows.

Leverage is not risk. It decides how much margin the trade locks up and how close liquidation sits; the stop decides what you lose. The liquidation figure here is the standard isolated-margin estimate. Your exchange's own figure, which counts its fee tiers and mark price, always wins. For the maths behind it, see liquidation vs stop loss and the liquidation price calculator.

Sizing is half the job. Tracking it is the other half.

Knowing your size is worthless if you don't know whether your 1%-risk trades actually perform better than the days you "felt confident" and doubled it. The free RB Trading journal logs risk % on every trade and shows you the win rate at each risk level, most traders find their oversized trades lose more often, not just bigger.

Track your next 50 trades free →
Drawdown Recovery Calculator Prop Firm Drawdown Calculator R-multiples explained Prop firm journal Break-even win rate calculator Crypto leverage calculator Liquidation price calculator How to journal perps
By RB Trading · Updated 19 Nov 2026 · Free forever, no signup needed · Pip values, contract sizes and FX conversions are approximations, confirm against your broker's contract specification before trading.
FAQ

Frequently asked questions

How do I calculate position size in forex?

Position size (lots) = (account balance × risk %) ÷ (stop-loss in pips × pip value per lot). Example: a $10,000 account risking 1% with a 25-pip stop on EURUSD (pip value $10/lot) = $100 ÷ (25 × $10) = 0.40 lots.

What percentage of my account should I risk per trade?

Most professional and prop-firm traders risk 0.5%–2% per trade, with 1% the most common. At 1% risk it takes 10 consecutive losses to draw down roughly 10%, inside most prop firms' maximum drawdown limit.

Which instruments does this position size calculator support?

The calculator covers 27 forex pairs, 5 metals (gold, silver, platinum, palladium, copper), 8 cash indices (NAS100, SPX500, US30, DAX, FRA40, ESP35, UK100, JPN225) and 13 CME futures contracts including ES, NQ, YM, RTY, their micros, crude oil, natural gas and the grains. Forex and metals return lot sizes, futures return whole contracts, and indices convert their home-currency point value into USD.

How do I calculate position size on a crypto perp?

Units = cash at risk ÷ (stop distance + the fees paid to open and close, per unit). A $10,000 account risking 1% on a BTC perp long at 100,000 with the stop at 98,000 and a 0.05% fee each side risks $100 on 2,000 + 99 = 2,099 per unit, so the size is 0.047 BTC. Leverage only sets the margin: at 10x that position ties up about $470.

What is the pip value for gold (XAUUSD)?

For XAUUSD, 1 standard lot is 100 oz, so a $0.10 price move (one pip on most platforms) is worth $10 per lot, the same per-pip value as EURUSD, but gold moves many more pips per day, so stops are wider and sizes smaller.